{"product_id":"large-u-joint-cover-kit-for-slip-yoke-position","title":"U-Joints Protecor Cover for Slip-Yoke mount with Large U-Joints (Over 7\" cross) including 1760, 5-281X, 5-676X, 1810, 1880, RPL25.","description":"\u003cdiv class=\"trix-content\"\u003e\n  \u003cul\u003e\n\u003cli\u003e\n\u003cbr\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFor all heavy truck part numbers:\u003cbr\u003eStep 1. Measure mounting surface diameter using deep-jaw calipers, a diameter tape measure (Stanley p\/n 33-115 works well) or measure the circumference and divide by Pi (3.1417).\u003cbr\u003eStep 2. Select the corresponding packet of 4 mounting-pads, the interchangeable pads are numbered to match the driveline diameters covered in the kit. Example: 4590PD fits 4.590” diameter.\u003cbr\u003eStep 3. Affix the 4 mounting pads over the 2 attachment bars in each of the cover halves.\u003cbr\u003eStep 4. Place the cover halves over the drive line, rotate as needed to accommodate balancing weights. A zip-tie is included to hold the cover in place (cut it off \u0026amp; discard once screws are tightened).\u003cbr\u003eStep 5. Using a 4mm hex (Allen) driver, tighten the 12ea. M5 x 0.8 captive socket head screws. There is no need to overtighten, snug the fasteners as you would on any other lightweight cover.\u003cbr\u003e* When installed properly, the cover will not move on the mounting surface. Using reasonable force on the open bell, if movement is visible at the mount area, switch-out 2 opposing pads (for balance) to the next smaller diameter.\u003cbr\u003eTo access grease fittings facing driveshaft with cover in-place\u003cbr\u003eStep 1. Looking into the open end of the cover, visually align and mark a spot above and in-line with the zerk, on the sloping section of the cover.\u003cbr\u003eStep 2. Using a 15.75mm or 5\/8” diameter drill bit on slow speed, drill an access hole on the marked spot.\u003cbr\u003eStep 3. Place the provided 5\/8” diameter plug(s) into the access hole(s) in the cover.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtector U-Joint Cover for Slip-Yoke mount with Large U-Joints (Over 7\" cross) including 1760, 5-281X, 1810, 1880, RPL25. Kit includes fasteners, grease port plugs and 7 sets of mounting pads to fit all common slip-yokes with outside diameters from 3.125\" to 3.875\". Special tapered mounting pads are included for Spicer slip-yokes.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"MiamiStar.com","offers":[{"title":"Default Title","offer_id":43150965538879,"sku":"8662SLK","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1750\/0827\/files\/bbf66a_789e308f77f2479299f854b6beb26738_mv2.png?v=1776876352","url":"https:\/\/miamistar.com\/products\/large-u-joint-cover-kit-for-slip-yoke-position","provider":"MiamiStar.com","version":"1.0","type":"link"}